Sound Barrier Mats UK - Revac Sheetblok Alternative

HOME ABOUT US PRODUCTS HELP CONTACT PRICE LIST COMMERCIAL SITE

Please Note: This product is very heavy and larger orders will require help with offloading

SOUNDPROOFING MATS
Soundproofing Mats have excellent sound insulating properties. Soundproofing mats can be used as a sole sound barrier layer, or as part of a multilayer composite with other materials such as sound absorbing foam and carpet.

These soundproofing mat sheets are extremely effective at improving the sound insulation properties of lightweight plasterboard partitions, floors and almost anything else !! Two to three layers can be used on hard floors to reduce noise transfer dramatically.

It can be used in ceiling constructions, walls etc. and can almost double the soundproofing performance of a standard lightweight stud partition.
Soundproofing mat is particularly effective at reducing the critical dip (or coincidence) frequency which is always present in standard plasterboard constructions as well as increasing the low frequency performance.

Many construction materials and techniques don't provide enough soundproofing isolation. Rigid surfaces such as plasterboard, (including multiple layers), or even a block wall will absorb little sound energy. This is because solid rigid materials still actually tend to vibrate and re-radiate sound on the other side. Soundproofing mat however has tremendous density and mass and will absorb sound energy far better than solid materials ever will. Soundproofing mat is not only an incredible soundproofing material but can be easily installed without construction changes, special tools, or skilled labour.

INSTALLATION
Simply lay down the mats butted tightly together. Joints should ideally be taped with our 75mm wide aluminium duct tape. Sheets should be butted up to the edges of the room with any cutting required being done where the sheets meets in the middle of the room. Successive layers should be alternated i.e. lay the first layer from left to right and the second layer from back to front to that any seams are not directly under each other.

You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.

SBM5 soundproofing revac sheetblok sound barrier mats

Our Spray Adhesive is ideal for sticking these mats to floors, walls and ceilings.

Recently we have had customers assume that these mats will also be suitable for uprating concrete floors and walls - this is not the case. They should only be used for lightweight stud partitions or wooden floors otherwise the improvement gained will not be enough. For concrete walls you need to use our M20 panels or our resilient bar system and for concrete floors you need to look at our Quietfloor Slabs or our IsoBase R50 systems.

Soundproofing mats consists of a high density, 5kg per sq.m. mineral loaded flexible thermoplastic polymer that is as effective as a sheet of lead at stopping the transmission of sound. It acts as a thin, dense sound barrier layer in walls, ceilings or floors and it's most effective when used as one component of a multi-layered construction scheme.
Soundproofing mat helps in decoupling studwork, floors, walls, brackets and just about anything else.
Soundproofing mats are easily cut and formed with a knife or scissors.

Technical Details

Color
Sheet Size
SRI (3mm material)
Weight
Nominal Thickness
Flammability: (FMVSS 302)
Service Temp.: (securely fixed)

Black
900mm x 1200mm
24
5Kg/m² (+/- 10%)
2.5mm (+/- 20%)

Self extinguishing
<90°C for extended periods
<120°C for short periods

Soundproofing Mat NRC Data
125Hz	250Hz	500Hz	1kHz	2kHz	4kHz	SRI
15	19	21	28	33	37	24

PRICES

Sound Barrier Mats Revac Sheetblok Alternative

T50 High Performance Acoustic Membrane Range

PRODUCT DESCRIPTION

T50 and TS50 are a polymer-based, asphalt-free, high density synthetic soundproofing membrane, that offers good acoustic insulation in different building elements. It has extremely high visco-elasticity as well as being extremely flexible even in cold temperatures. Available in plain (T50) or peel of self-adhesive backed rolls (TS50).

PROPERTIES

R_W 25.2dB for a single layer (test certificate available on request) and around 32dB for a 10kg/m² double layer.
High acoustic insulation especially when combined with lightweight panels and boards.
Improved low frequency performance.
Flexible.
Great elongation capacity
Easy handling and adaptable to uneven surfaces.
Cold and heat resistant.
Excellent ageing resistance.
Rotproof.
Euroclass B, s2, d0 (Class0 UK equivalent)

Fire Performance
Euroclass B, s2, d0 in accordance with EN 13823. (Class0 to the UK equivalent)

B - Contribution to combustion is very limited. Demonstrated that the fire is not propagated beyond the strict area in which it has been applied.
s2 - Average amount and speed of emission of smoke.
d0 - No flammable drops or particles are produced.

This classification places the T range at the forefront of soundproofing membranes in terms of fire resistance. It is the first soundproofing membrane on the market to receive Euroclass Certification . To give you an idea of how good this is, Euroclass Standards above B (A1 and A2) can only be awarded to incombustible materials. Materials between Euroclass A and B can be considered the safest in case of fire, whilst those of level C and below can begin to be considered dangerous.
Worthy of note is that the tests were carried out directly on the product with no incombustible protection such as laminated plasterboard or metal plate and, on the self adhesive version, which makes the result all the more significant!

PACKAGING AND STORAGE
Type	kg/m²	Thickness (mm)	Packaging	Units per pallet
T50	5	2.6	6 x 1.05m rolls	24 rolls (151.2m²)
TS50	5	2.6	6 x 1m rolls	24 rolls (144m²)

TECHNICAL DATA

Test	Value
Density	1.9g/cm³ (+/-0.05)
Pliability (UEAtc)	Does not break when bent at -20°C
Elongation (UNE 104-281/6.6	300%
Crushing strength	4.84kg/cm²
Fire resistance	Euroclass B, s2, d0 (Class0 UK equivalent)
Acoustic performance	See system data sheets

APPLICATIONS:

Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials).
Soundproofing against airborne noise in ceilings.
Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring.
Damping of impact noise caused by atmospheric agents on metal decks.
Combined with sound-absorbent materials, it offers products with high acoustic performance.
Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc.

For further information see examples in systems sheets.

You need to either upgrade your Flash Player or install Flash or turn on Javascript to view missing content. You can download the pluggin from Adobe Here.


All information contained in these details is given in good faith but without warranty. Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs 2004-2008